The Lafarge manufacturing team takes the challenge to use less water In plasterboard production, water serves two important functions. While some water is required...
My Manufacturing Projects
CONCLUSION Justification of this type of product change was questioned mainly due to some failures to identify faulty product and prevent it from being...
Everywhere in the world, SAFETY is our PRIORITY It is compulsory to wear Safety Glasses, Safety Helmet and Safety Boots in our plant at...
Everywhere in the world QUALITY is our reference! Change from 1312RE to 1312FR without stopping Board-line is a very complex change and one with...
Case Study No. 2Change on 16/01/2008 Chart below is presenting Dryer temperature profile during this change. Core Mix phase went smoothly and without any...
Case Study No. 1Change on 03/11/2007 Core Mix phase during this particular change of product took less than 7 minutes to complete. Face paper...
Dryer Temperature Profilesunder different conditions Dryer in Matraville plant is made of 2 zones and has 8 decks. Dryer Chain speed is calculated by...
Good preparation, communication and cooperation between operators on the “wet” side of the Board-line is essential for success of the change. Some advanced planning...
Board weight changes dramatically from 8.1 kg/m2 for 1312RE board to 10.5 kg/m2 for 1312FR board. This represents change of approximately 40 kg/min to...
PURPOSE Purpose of this Guide is to provide information and knowledge required for performing product change from 1312RE to 1312FR without stopping board-line in...
